NEW – KINGMAX GT-1900B-IP Electronic Tacker and Box X Sewing Machine with On-Board Programming and 40mm x 30mm Sewing Field
The KINGMAX GT-1900B-IP is an electronically controlled bar tacker with a 40mm x 30mm (1.6″ x 1.2″) max sewing field. Ideal for sewing 1″ webbing and straps such as dog collars, tactical gear and similar applications.
This particular machine is factory set with a BIG hook and bobbin using needle system 135 x 17. Ideal thread sizes are TEX-60, 70, 90 and 135. The machine has on-board full color LCD touch screen control panel for pattern and parameter management, pattern creation and pattern selection of the 100 pre-programmed patterns from horizontal and vertical tacks, eyelets, box and box patterns and more.
As you can see in the pics below, I’ve set up this machine to sew box x pattern on 1″ webbing. The East-West tacking clamp is also included.
We’ve been setting up this type of machines for customers all over the country for more than 10 years for differing applications. If you are interested in this machine, contact us to help us understand your exact application and requirements. Custom clamping and programming is available to assure you receive the machine set up correctly and you are able to start production upon delivery.
This machine will be best at sewing 1″ webbing widths (and smaller). The machine is driven by high torque stepping motors and will sew up to 4 to 6 layers of webbing – depending on webbing density.
- 40mm (X) by 30mm (Y) Max Sewing Field
- Factory set BIG Hook and bobbins
- Large Screen LCD Touch Screen Programmer / Control Panel
- 100 Pre-Programmed Patterns
- New Pattern Creation and Editing – straight lines, zig zag lines, circles, squares, box-x, etc.
- Digital Parameter Settings
- Digital Sewing Cycle Speed Control
- Servo Motor Main Drive / Stepping Motors for X and Y Motion
- Auto Thread Trimmer (Top and Bottom Thread)
- 135×17 (DPx17) Needle System, 16 to 22 Ideal Needle Size Range
- Electronic Solenoid Foot Raising / Lowering (No Air Compressor Needed)
- Ships complete and fully assembled
- Custom clamping and programming available per request
The lead time on these machines is 5 to 10 days depending on the complexity of your set-up.
This KINGMAX GT-1900B-IP is priced and ships complete and fully assembled:
- Head – Mounted on the Stand, Sewn Off and Tested
- 1″ Box-X Clamp and 3/4″ East-West Tacking Clamp in the Drawer
- Programmer / Control Panel
- Table Top
- Stand
- 220 Volt Factory Set Power (110 Volts Converter Ships with the Machine)
- Thread Stand
- Extra Needles
- Extra Bobbins
- Oil
- Factory Supplied Tools and Manuals
Contact SEWMAX at 469-879-6213 for more details or to purchase this machine over the phone.
…
